20 Questions You Should Always To Ask About Fiat Panda Key Fob Replacement Before You Decide To Purchase It
Reasons Your Fiat 500 Key Fob Won't Work
A fiat 500 key fob is a handy way to unlock the doors and start the car. There are many reasons the fob could stop working. These include a dead battery, damage to the receiver module, issues, and interfering.
This listing is for an NEW replacement Fiat Flip Key Remote that is similar to the Ilco brand. It has to be professionally programmed (click here to search for local automotive locksmiths). It comes with lock, unlock and trunk buttons.
Dead Coin Battery
The most frequent reason why your 500 key fob will not work is the battery is dead. Modern key fobs have a limited operating range, and must be within only a few feet from the vehicle to function. If you're not close to your vehicle when you press the key fob button the car won't respond and will display a "Key Fob Not Detected" message in the instrument cluster.
If this occurs If this happens, replace the battery in the coin-cell (Part Number CR2032) by a new one from a reputable brand like Panasonic Duracell or Energizer. They are usually available in your local hardware store, or online.
After you've replaced the battery in the coin cell It is possible to test it by standing near your Fiat 500 and pressing the buttons. The car will blink its parking lights and the key fob should be able to operate the lock and unlock buttons.
If the key fob won't function after replacing the battery, it may have water damage that prevents it from connecting to the receiver module inside your vehicle. Water damage can occur in a variety of ways, such as an easy splash or submerging the key fob in saltwater at the beach. If you suspect your fob has been exposed to water, try placing it in a dry rice bag to draw the moisture back out. If that doesn't work, your fob may need to be reprogrammed by an experienced auto locksmith or by the dealer.
Water Damage
While the fob has some rubber seals to keep water out of the chip's electronic circuit, submerging it in the ocean or washing it in a machine could cause water damage. Saltwater can be particularly harmful to the fob's circuit board which causes it to short out and eventually end up dying. It's not the best idea to submerge the fob in water, but don't give it up if you accidentally drop it in water or fail to remove it from your pocket.
First, remove the battery from the fob. Before replacing the battery clean the electronic chip using isopropyl or another similar product. Test the fob afterward to verify if it's functioning. If the fob doesn't work then it might need to be reset. This is usually handled by a professional or dealer auto locksmith.
If your key is a bit older and not programmed for your car You will need to replace it completely. A professional locksmith for automotive can complete this simple process. The locksmith will have to cut the key to match the ignition of your vehicle. The locksmith also needs to reprogram your fob into the car's system. This is a quick and cost-effective process that is usually completed in the next day.
Receiver Module Issues
One of the simplest reasons why your 500 key fob might stop functioning is because it's out of range. The remote has a maximum range of 30 feet. So if you are too far away from your vehicle it will not respond to your commands. It is possible to fix this by moving the remote closer to your car until it responds.
If your fob does not work after you replace the battery for the coin, also known as a "button", "watch" or "button", it could be due to a problem with the internal circuit board. Reprogramming the fob typically resolves this problem. You can find the procedure for the majority of vehicles on YouTube or in the owner's guide.
fiat 500 replacement key cost is sometimes necessary to replace the clips made of metal that hold the coin batteries in their place. If they lose tension it can prevent your coin battery from sitting properly, causing your remote to malfunction.
In rare cases the fob might be out of the vehicle's sync because of hardware or software problems. This could be a huge headache, but you can usually resolve this issue by visiting an auto locksmith to reprogram your fob for you. In some instances the software may require reinstallation to your body control modules.
Interference
Interference can also cause the key fob to be unable to receive or transmit the signal. This could occur if the key fob is near the radio transmitter (cell phones or radar detectors) or another source of electromagnetic radiation. Other reasons why the key fob may not function include a weak connection to the buttons or the internal chip, or water damage.
If your key fob suddenly stopped working, or if you've tried everything at home to solve the issue (e.g. replacing the battery, reprogramming it and using the spare key fob, it could have a defective receiver module on your 500. The receiver module is located under the dash and receives the radio frequency signals from the key fob. It then converts them into electronic commands that the vehicle interprets.
Luckily, there is an easy way to reset all of the on-board systems in your 500 keys, including the key fob. Disconnect the battery for 15 minutes by taking off first the negative cable, then the positive cable. Then reconnect the battery. This will erase any remaining electricity, and allow you to restart the car's computer. This can help you get your key fob working again. If the issue continues, you should consult an experienced technician. They can identify the root cause of your problem.